Black Friday: 20% Off Radiators & 10% Off All Boiler/Cylinder Packs


Limited time offer: 22nd Nov - 2nd Dec (T&C’s Apply)


Use Codes RAD20 and PACK10 in Basket


Save on Radiators Save on Packs

  • Best Seller
    Best Seller

14.4kW Comet PV Electric Boiler & 150L Pre-Plumbed Cylinder

£3,026.47  £2,482.32 inc. VAT

Free UK Delivery on orders

Comet PV Electric Boiler & Cylinder Heatpacks are designed to reduce installation time and eliminate unnecessary external plumbing and pipe work. This value-for-money package includes a 14.4kw Comet PV Electric Boiler that is configurable from 7.2kw to 14.4kw on-site, and 150 litre Pre-Plumbed Indirect Stainless Steel Cylinder which is pre-wired and pre-plumbed.

  • WiFi Control
    WiFi Control
  • Energy Efficient
    Energy Efficient
  • ErP Ready
    ErP Ready
  • Virtually Silent
    Virtually Silent
  • Time Saver Install
    Time Saver Install
  • 5

    Year Boiler Warranty
  • 25

    Year Cylinder Warranty

The Electric Heating Company recognise that “Time is Money” and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system.

EHC offer Electric Boiler & Cylinder Packages to reduce installation time by up to 70% by offering Pre-Plumbed Indirect Cylinders with their range of Comet PV Electric System Boilers. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump which is included within the Boiler. They are designed with the busy installer in mind as all plumbing and electrical connections are prepared for an instant fit.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

Comet PV Electric Boiler Packages are available with single phase Boilers from 8kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 250L. An Electric Boiler on a wet central heating system presents all the controllability offered by a gas fired central heating system. Using standard pipe-work, conventional wet system radiators and thermostatic radiator valves the boiler, being 100% efficient and fully modulating, will take the same amount of time to heat the property as a gas boiler. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

Due to large volumes of parcels and pallets being put through the transport companies, we cannot guarantee a next delivery.

Please be aware you will need someone on hand to sign for the delivery and move the item into your property. Due to the weight of these products, we strongly recommend having 2 or more people for the lifting. Some EHC radiators may be delivered on a pallet. All pallets are delivered roadside.

If you are ordering multiple different items, we will always endeavour to dispatch your goods together. However, separate dispatches may be necessary if the items you have ordered are being shipped from different locations. Check our delivery page or speak to our customer service team for more information.

SKU
EHCEPV14.4/150PPC

Boiler Specification

Wattage
14.4kW
Weight
20.5KG
Height
716mm
Width
316mm
Depth
235mm
BTU
30,709
ErP Rating
D
Boiler Warranty
5 years

Cylinder Specification

Capacity
150litres
Diameter
550mm
Height
1120mm
Full Weight
185KG
Empty Weight
30KG
ErP Rating
C
Cylinder Warranty
25 years

What's Included - Choice of Electric Boiler & Pre-Plumbed Indirect Stainless Steel Cylinder

 

  • 2 Port Zone Valve x2 (Fitted)
  • Dual Cylinder Thermostat (Fitted)
  • Wiring Centre (Fitted)
  • Temperature & Pressure Relief Valve (Fitted)
  • 1 x 3kW Immersion Heater (Fitted)

 

  • Filling loop
  • DHW Expansion Vessel
  • 15mm / 22mm Tundish (Fitted)
  • Inlet Control Set (Fitted)
  • Auto Bypass & Filling Loop (Fitted)
  • Installation & Maintenance Instructions
  • Benchmark Logbook
Screenshot 2024-07-04 155911
neptune-pre-plumbed-indirect-unvented

Pre-Plumbed Cylinder Features

  • ErP C-Rated Hot Water Cylinder
  • 50mm Insulation
  • T&P Relief Valve
  • DHW Zone Valve
  • Heating Zone Valve
  • Drain Point
  • Backup 3kW Immersion Heater

The Pre-Plumbed Cylinder Package is pre-wired and pre-plumbed to reduce installation time by up to 70%. On multiple installations this ensures that all properties are installed using the same configuration.

ehc-electric-boilers

EHC - The Electric Boiler Specialists

  • Installation is quicker than a gas system
  • The wiring of an Electric Boiler is the same as an Electric Shower
  • Electric Boilers can be used for Open Vented Systems
  • Can be used as back-up for Heat Pumps
  • Standard radiators and valves can be used with Electric Boilers
  • EHC Electric Boilers have a soft start to avoid power surges
  • Electric Boilers are almost silent when operating
  • Electric Boilers emit no noxious fumes or gases
  • Can be used with underfloor heating systems
  • EHC only use and recommend High Efficiency ErP Smart Pumps
You may also like

Newsletter

Subscribe to our mailing list

Logo

© 2024 The Electric Heating Company Ltd

Company Number: SC289495

VAT Number: GB442070921

Website by Yello

Contact

01698 820533

info@electric-heatingcompany.co.uk

Block 5, Unit 40, Third Road, Blantyre Industrial Estate, Blantyre, South Lanarkshire G72 0UP
EHC trustpilot